Drilling Fluid Separation System,Mud Circulation System for HDD & CBM News-KOSUN

Home

News

Home > News >

Nov 19, 2024Low Temperature Solid Control System and Desert Drilling Solid Control System

Low Temperature Solid Control System and Desert Drilling Solid Control System The solid control system of Xi an KOSUN low-temperature drilling rig can ensure normal operation at -45 ~ 50℃. The key technology of the solid control system of low-temperature drilling rig is tank structure design and s...
Nov 18, 2024Maintenance of shale shaker flameproof motor

KOSUN drilling fluid vibrating screen in the solid control system in the first level of solid control purification equipment, mainly to screen the harmful large particles in the drilling mud, the liquid phase after screening into the sand separator and other solid control purification equipment, in t...
Nov 14, 2024KOSUN_mechanical mud solid control system

Solid control system, also known as drilling fluid purification system, is mainly used for solid phase control and solid-liquid separation of drilling fluid in the drilling process, and achieve mud recycling under the condition of ensuring the stability of drilling fluid performance. The solid contro...
Nov 12, 2024HDD mud recycling system can recycle waste mud

KOSUN HDD mud recycling system can recycle waste mud, thus saving costs for users, improving customer economic benefits, protecting drilling rigs, and protecting the surrounding environment from pollution. KOSUN HDD mud recovery system mainly achieves the purpose of purification, recycling and reuse...
Nov 12, 2024Sludge water treatment system commonly used process two

Sludge water treatment system commonly used process two The third stage: secondary swirl After being treated by the primary cyclone, the slurry flows into the secondary cyclone main tank, and the slurry pump is pressurized into the secondary cyclone, and the 0.075mm-0.020mm particles in the mud are...
Oct 21, 2024Specific application of vacuum degasser in underbalanced drilling technology

In the drilling process, the gas carried by the drilling fluid from the well affects the performance of the mud and has safety risks, and also affects the service life of some solid control equipment, so it is necessary to install a vacuum degasser to remove the gas in the mud. In underbalanced drill...
Oct 14, 2024Waste oil-based drilling fluid treatment methods

First, the importance of waste oil-based drilling fluid treatment Waste oil-based drilling fluid is a drilling fluid used in drilling. The main components are oil and drilling sludge. Because it contains a large amount of waste oil, if it is directly discharged into the environment, it will seriousl...
Oct 11, 2024What is the difference between solid drilling control and mud retention?

Drilling solid control system is a slurry pulping system for drilling rig, which is mainly used to control and manage the mud performance in the drilling process, and provide the necessary lubrication and cooling conditions for drilling operations. Mud not landing is the back-end equipment of drilli...
Oct 08, 2024 Introduction to sludge treatment process

The selection of sludge treatment technology should be considered according to the characteristics of sludge, treatment objectives and economic conditions. With the improvement of environmental awareness and technological progress, sludge treatment will be more inclined to the direction of efficien...
Sep 29, 2024 How to deal with piling mud?

Piling mud is mainly composed of soil, water and chemical substances, which contains a lot of suspended matter and organic matter, if not treated directly discharged, will cause serious pollution to the environment. Piling mud is an inevitable waste in construction projects. How to deal with the mud ...

Index
1
2
3
4
5
6
7
Next
End

19Nov

18Nov

14Nov

12Nov

12Nov

21Oct

29Apr

28Apr

11Apr

25Jan

05Sep

05Sep