Today, 4 units of VC700 vertical cuttings dryers produced by Xi’an KOSUN are about to be sent to the drilling project site of a Russian customer.

The vertical cuttings dryers produced by Xi’an KOSUN are mainly used for the treatment of drilling oil-based mud waste. Through the principle of centrifugal separation, they can effectively recover the liquid phase components in the drill cuttings, making the solid phase very dry. The oil-based mud in the drill cuttings can be recovered, which not only reduces the cost of drilling operations but also reduces environmental pollution. It meets international emission standards and environmental requirements and can be used for drill cuttings treatment in both land-based and offshore drilling.

Features and advantages of the VC700 vertical cuttings dryers:

1. Efficient solid-liquid separation, effectively recovering the oil-based mud in the drill cuttings, greatly reducing the discharge of the solid phase. The oil content in the treated solid phase can be below 5%.

2. Effective recovery of oil-based mud, recovering the mud lost due to shale shaker vibration, moving rig, and screen clogging.

3. Common wearing parts can be replaced from the top of the device without moving any equipment or belts.

4. The scraper on the inner rotor is coated with wear-resistant and corrosion-resistant tungsten carbide material, which extends its service life and reduces maintenance costs.

5. Suitable for the recovery and treatment of oil-based mud drill cuttings.

6. Meets the on-site operation requirements of no mud spillage, reducing the cost of drilling oil-based mud and waste treatment.

The vertical cuttings dryers produced by Xi’an KOSUN have been continuously upgraded to be more suitable for various complex working conditions. They have good performance and long service life. They have been exported to many countries and regions around the world and are widely used in domestic and foreign drilling platforms.

Tag:  VC700 vertical cuttings dryers, for sale